fbpx

Salt and concrete have a bad reputation. Rock salt is often used on roads and driveways during cold weather to melt ice and snow. The salt is blamed for damaging concrete surfaces but is that the whole truth? Is there a way to prevent damage to concrete?

How do ice melters work?

Ice melters lower the freezing point of water. Applying them to surfaces melts snow and ice. The resulting water won’t turn back to ice until the temperature falls below these colder temperatures. When temperatures rise again, treated residue changes the ice back to water. When temperatures fall, it refreezes. These swings are called freeze-thaw cycles.

thermometers showing freezing point of untreated concrete and treated with salt, potassium chloride, magnesium chloride, calcium chloride

Rock salt, or sodium chloride, lowers the freezing point from 32o F (0o C) to 25o F (-3.9o C). Potassium Chloride lowers it to 15o F (-9.4o C). Magnesium Chloride lowers it to -15o F (-26.1o C). Calcium chloride lowers it to -25o F (-31.7o C)

Custom blends of different ice melters like calcium magnesium acetate are available for reduced costs but are less effective than pure products. Ammonium products are also available are a but these chemicals attack concrete directly and should never be used.

Does salt destroy concrete?

Indirectly, yes, salt and concrete mean damage. After spreading salt to melt snow or ice, the top surface of concrete often spalls or scales. But salt is not directly at fault. It does however play a role in winter concrete damage. In fact, ALL ice melters have the capability to damage concrete.

Concrete is porous and absorbs water easily

When the snow and ice melt with the help of rock salt, they enter the concrete surface as salted water. Salt attracts more water and increases the pressure of frozen water. 

When temperatures fall below 25 degrees Fahrenheit, the water refreezes and expands with added pressure causing damage if the concrete is not strong enough. Fresh or low-strength concrete is more susceptible to damage because it holds more water already. Concrete pavers are extremely strong and not very porous so not affected by freeze thaw cycles.

What does salt and concrete damage look like?

The increased freezing water creates an upward pressure resulting in “pitted” or spalled surfaces leaving the aggregate mixture beneath visible. It appears in large sections or can be scattered in smaller areas.

salt damaged concrete

How do you protect concrete from salt damage?

Quality Construction

The first line of defence to protect against the damaging reaction between salt and concrete is during construction. It is important to not add too much water when mixing concrete or use a water reducer to help make the concrete stronger.

Concrete Sealer

In addition to quality construction, you can add additional protection by sealing the concrete to prevent further salt damage.

Read more about concrete sealing here.

Salt Alternatives

To eliminate the risk of salt damage, you can use an environmentally friendly alternative like sand. Studies on natural deicers like beet juice indicate a successful reduction of the freezing point but seem to be more harmful to aquatic species.

For your next concrete project, contact Brosco Concrete to ensure high-quality construction, your first line of defence against salt and concrete damage. We can also help you with prevention methods like concrete sealing and recommend the best option for deicers given your climate and surface.

Contact Us Today

Leave a Reply